Equipment - Wire drawing industries springs factories stealworks steel scrap Equipment Machines

Pavilions

trafilatura, wire drawing, trefilage, trefilado

Fairs |

InfoPoint

Virtual Fair > Categories > Equipment

Reels
Pavilions D1[40]

Wire-guides & Wire-straighteners
Pavilions D2[14]

Pulling nippers
Pavilions D3[4]

Lamination boxes
Pavilions D4[9]

Orbiting dieboxes
Pavilions D5[3]

Controls and checks
Pavilions D6[65]

Packing
Pavilions D7[11]

Various equipment
Pavilions D8[77]

Sponsors

Firm		Description
	VIOLI SRL +39 0575 810487 Via XXV Aprile 86 52048 Monte San Savino (Arezzo)-Italy	The Violi srl start operations in 1992 as a manufacturer of machines for goldsmiths, succeeded it obtaining an important position among companies in the sector. The company responds in a timely manner to market requirements and this has led the company in the industrial field. Leader in the creation of machines dedicated to the full cycle of drawing, straightening and cutting of tubes and bars.
	OMF Officina Meccanica Frigerio S.R.L. +39 031 658254 Via Raffaello 6/11 23861 Cesana Brianza (Lecco)-Italy	Officina meccanica Frigerio has always been concerned with drawing. Our technical skills,joined together with the vicinity to drawers’ need and also with ISO 9001:2000 certification made us able to qualify in: Scaling machinery Orbiting brushing machine Turning wire drawing die Scarps winder
	iba dealer italy +39 0432 685832 Via Alessandro Volta, 20 33050 Pavia di Udine (Udine)-Italy	iba dealer italy iba ag arrives in Italy, presenting a series of hardware and software dedicated to the world of process control. The main target is to foreseen to the end users and to companies, who design and manufacture the machineries and production lines, some products dedicated to: - Staff Quality Manager; - Staff Production Manager; - Personnel for electrical and mechanical maintenance. These products are often used in the steel plants, as EAF/LF Furnaces, continuous casting machines (CCM) until the end of any rolling mill, through the preheating furnace and the finish area, as a stacker machine, a winder or and high speed block (BGV). The ultimate goal is to provide a range of instruments, based on the latest technologies available to generate reports of production, having the characteristics necessary to perform quality control of finished products or semi-finished and all the tools necessary to optimize the production process and troubleshooting. We are pleased that what we propose is not invasive and therefore its integration can be carried out in equipment of an old design and installation. Our products can be installed without requiring the line’s stop, but can be installed during routine maintenance activities planned, this is thanks to a number of benefits obtained through the use of protocols and interface cards designed and developed to meet the needs of communication and interfacing with many different control systems.
	M.P. METAL PLAST COMPONENTS Srl +39 0341 642294 Via E. Fermi, 7 23801 Calolziocorte (Lecco)-Italy	Medium heavy metal structural work construction to drawings. The “MP Metal Plast Components Srl” is a small but solid company able to create large projects. Its message “small but great for the great” expresses the company’s potential. The company is known for its “STAR ONE” hook, manufactured exclusively by MP, it is created based on specific customer needs, both in terms of dimensions and supplied accessory parts.
	GMP - Slovakia +42 156 6280211 Stanicna 109 07651 Pribenik ()-Slovakia	Suppliers Of Spools, Reels, Carriers And Packaging Supplies (Machined Precission Spools For Stranders, Metal Reels And Spools, Spool & Coil Specialty Packaging Systems, Carriers Process Annealing & Shipping, Collapsible Spools & Reels Incl Coil Handling Equip., Used Spools& Reels Incl. Spool & Reel Refurbishing, Spool & Reel Packaging & Other Material).
	Example stand - wiredrawing.net +39 0341 580139 Manzoni n°75 23868 Valmadrera (Lecco)-Italy	Do you want your company to appear in this space? Take an online stand on wiredrawing.net, the international online fair for the wire tube and cable industry, from raw materials to finished products. Your company name will rotate in this showcase on the 5 Homepages of the Network, and it will appear in your belonging pavilion. wiredrawing.net is a simple, economic and new generation instrument to increase the international visibility of your firm. Click here to visit the example stand.
	Corti Domenico Srl +39 335 1216671 Via Seminario 34 23800 Lecco (Lecco)-Italy	CORTI DOMENICO has been working in the field of packaging since 1978 and is specialized in the supply of complete lines “on stream” for small metallic and plastic parts, powders, springs, special wire forms. The lines are composed of various units, assembled and syncronized to get a sequence of operations to make the packaging cycle fully automatic. The plants are all certificated with the required documentation.
	Invimec Srl +39 0444 376245 Via della Cultura, 17 36050 Sovizzo (Vicenza)-Italy	New permanent Exhibitor: New line rolling machines with the train system were developed (with a single motor or independently motorised heads), a range of models for profiling machines was created (also with more than one profiling head), along with a whole series of machinery for subsequent processes (incision, cutting, engraving, winding).
	OSCA CORNARA Srl - Vibratori ed elevatori industriali +39 0341 605039 Via Moronata 27 23854 Olginate (Lecco)-Italy	OSCA CORNARA srl manufactures and sells various types of machines and equipment: - circular vibrators for automatic feedings - linear vibrators with adjustable counterweight (patented) - vibrators for dosing channels - electrical control equipment - cylindrical, conical, stepped bowls in normal steel or stainless steel - antinoise coatings in polyurethane - level sensors - non sonorous cloaks - additional hoppers to circular vibrators - supporting columns - conveyors - vibrators with hopper disentangling device - vibrating boards for the tamping of products - interlocking elevators to circular vibrators - feeding units with elevator and linear vibrator - sieving and mass gauging groups - gauge roller conveyors - eccentric motor vibrators - pneumatic vibrators - hinged chains - vibrators with disentangling devices
	DEM Wire Rolling Technology +39 0432 655393 Viale del Lavoro, 23 33050 Pavia di Udine (Udine)-Italy	DEM delivers worldwide solutions in the wire field for cold material transformation, such as cold profile wire rolling, wire flattening and cold material handling equipment. DEM develops and produces driven cold rolling mills for wire profile or wire flattening production, idle cold rolling cassettes, mostly used for wire ribbing, and cold rolling auxiliary equipment for coiling, spooling or recoiling operations or bar handling facilities, such as chamfering or cutting. DEM equipment is used worldwide in the automotive, textile, furniture, household appliance, square sections spring wire, ornamental profile and construction industries.
	Tecnofil S.p.A. +39 030 9517655 via Brescia n° 49 25023 Gottolengo (Brescia)-Italy	TECNOFIL is specialized in the production of low and medium carbon steel wire. TECNOFIL offers high quality wire and wire band and a customer-oriented service. The machinery department makes TECNOFIL the most complete partner in the wire industry.
	Loweb di Lorenzo Novo +39 011 6812679 Via Belvedere n° 35/4 10028 Trofarello (Torino)-Italy	New permanent Exhibitor UNDER COSTRUCTION
	RTP PAGANONI SRL +39 031 658234 Via Carlo Porta, 20 23861 Cesana Brianza (Lecco)-Italy	R.T.P. di Paganoni & C. S.N.C. has its headquarters in Cesana Brianza (LC) at no. 20 via C. Porta.Located in the industrial zone of the town, it is easy to reach from Milan (about 50 km away), Lecco (20 km), Como (30 km) and from Switzerland.The map alongside and road signs clearly indicating the name of the company will enable you to reach R.T.P. easily and quickly.
	VINCIT di Leidi Carlo & C s.n.c. +39 0341 550485 Via Trebbia 4 23868 Valmadrera (Lecco)-Italy	New permanent Exhibitor UNDER COSTRUCTION
	Microstudio s.a.s. +39 0331 272279 Via Puccini 42 21010 Besnate (Varese)-Italy	Our Company has been developping high level electronic appliances for industry for over 10 years: The first video camera measuring the length of springs on speedy lap-machines was installed by our Company in 1988 (at that time our name was ELP).Recently we we have specialized more and more in appliances and sensors for the spring industry, becoming an European leader in some fields, just as the control with video cameras on lap-machines.
	EUROLLS Spa +39 0432 796511 VIA MALIGNANI 14 33040 Attimis (Udine)-Italy	New permanent Exhibitor: EUROLLS SpA manufactures a range of equipment, rolls and accessories for the following steel sectors: * Rolls for the cold rolling of wire, special profiles and sections * Rolls for the formation of welded ferrous and non ferrous pipes/tubes * Cold rolling cassettes for the production of ferrous and non-ferrous wire * Rolls for hot rolling area (guide rolls, non ferrous material etc.) * Equipment for production of cold rolled wire and welded lattice girders.
	PAN CHEMICALS S.p.A. +39 035 977488 Via Leopardi 24 24060 Rogno (Bergamo)-Italy	Pan Chemicals is a vibrant modern company situated in northern Italy. Set up in 1987 by a group of people with highly experience in the application of lubricants and associated technology to the wire industry, Pan Chemicals has rapidly acquired a leading role in the market its constant innovation and responsiveness to customer needs.We work with our customers and for our customers, and with our specialised Research and Engineering staff we are proud to offer a full range of high-technology solutions.Pan Chemicals, European leader in wire-drawing lubrificant technology of ferrous wires, non ferrous wires and stainless. Production and worldwide selling of ferrous and non ferrous bath and dry wire drawing lubrificants, phosphates.
	PAGANONI (Division of MARIO NAVA SPA) +39 031 87 62 27 Strada dei Livelli 6 23842 Bosisio Parini (Lecco)-Italy	Paganoni, division of MARIO NAVA S.p.A., has specialised in performing wear resistant coatings on mechanical parts for drawing machines.
	DANIELI CENTRO MASKIN +39 0432 1958111 Via Nazionale, 41 33042 Buttrio (Udine)-Italy	Quality DRAWING EQUIPMENT manufacturer for all your coil to bar and bar to bar requirements for diameter 5 to 120 mm. Wide range of additional COLD FINISHING EQUIPMENT and turn key plants including bar conditioning plants (straightening, NDT, peeling), circular saw cut off equipment and complete range of copper tube manufacturing equipment.DANIELI CENTRO MASKIN, the cold finishing division of the very well known DANIELI GROUP offers its customers over 30 years experience in the cold finishing equipment manufacturing business, with over 300 plants in operation around the world, plus the engineering, product development and local support services that only a large, multinatonal engineering group such as Danieli can supply.BEST TECHNOLOGY - CONSTANT INNOVATION - LOCAL SUPPORTDanieli Centro Maskin is your reliable partner!
	Foerster Italia Srl +39 02 90841600 via Dell'Artigianato 55 20083 Gaggiano (Milano)-Italy	New permanent Exhibitor: FOERSTER – Your competent partner for nondestructive testing NDT and metal detection.Foerster UK Limited - is a member of the Foerster Group of companies and are suppliers of non-destructive testing instruments, systems and consumables. This includes eddy-current, flux leakage, magnetic and ultrasonic equipment, plus associated mechanical handling.
	Tramev Srl +39 031658511 via Pascoli,47 23861 Cesana Brianza (Lecco)-Italy	the TRAMEV SRL, society leader in Italy and Europe is propose on the market of the wire. It is supplier of shears, standard and special technical accessories. DIVISION SOMMER: PORTABLE SHEARS AND TOOLS FOR THE CUT OF LINEAR MATERIALS PRODUCTION AND WORKING WIRE, CABLE, STRAND, BOLTS AND NUTS. DIVISION LINES AND ACCESSORIES: DECOILERS, WINDING AND TAKE UP MACHINES-, BLOCKS AND WIRE DRAWING MACHINE.
	OMAG di Affri Davide & C. s.a.s. +39 0332 200 546 Via Monte Tagliaferro,8 21056 Induno Olona (Varese)-Italy	AFFRI family of products is available for all types of tests including Hardness for: Rockwell, Brinell, Vickers, Knoop Hardness in a wide range of models for production and lab applications.AFFRI SYSTEM® tests virtually all earth's natural and man-made materials ranging from fragile fiber to the materials used in space exploration and biomedical research.
	MOLE ABRASIVI ERMOLI SRL +39 0332 425114 Via Cairoli, 4/14 21046 Malnate (Varese)-Italy	New permanent Exhibitor: Mole Abrasivi Ermoli has been in the abrasives business for more than 125 years, and so can boast the longest experience of all Italian grinding wheel manufacturers. Our core product is grinding wheels measuring up to 1015 mm in diameter. To these products we have added diamond tools, filter fabric and lubricoolants. We can therefore offer a complete consulting service for grinding, optimising the choice of all of these important components to obtain high performance. We also manufacture large wheels for deburring and sharpening, for the food industry, for working stone and brick. Our main strength is flexibility, which is expressed by our capacity to manufacture grinding wheels to order, rapid delivery, a thorough service and prompt technical advice.
	Bilanceria Rocca snc +39 0341 365295 Via Previati 17 23900 Lecco (Lecco)-Italy	Firm operating only on the Italian market.
	DEMA Software s.a.s. +39 0341 702564 Via Nazionale 56 23821 Abbadia Lariana (Lecco)-Italy	DEMA Software s.a.s.Via Nazionale 5623821 Abbadia Lariana(Lecco) (Italy)Tel. +39 0341 702564Fax +39 0341 702563
	EASYDUR ITALIANA di Renato Affri +39 0332.203626 Via Monte Tagliaferro, 8 21056 Induno Olona (Varese)-Italy	EASYDUR ITALIANA di Renato Affri SINCE 1985 IS SPECIALIZE TO DESIGNING AND MANUFACTURING TESTING INSTRUMENTS FOR COMPRESSION, TENSILE, TORSION, HARDNESS, IMAGE ANALYSE, MATERIALS TESTS. OUR FORCE IS BIG FLEXIBILITY AND ADAPTABILITY TO SATISFAY OUR INTERNATIONAL CUSTOMERS.
	Promills srl +39 0432 524178 - 1845642 Via Croazia n°14 int.3 33100 Udine (Udine)-Italy	Rolling cassettes to cold shape the wire and to compact steel, aluminium and copper strands and cables.More than 30 models of rolling cassettes for all applications and for instance to suit standard smooth and ribbed wire for electro-welded mesh (for concrete), standard and special profiles such as square, rectangle, triangle, hexagon, oval, etc.Our rolling cassettes can be fitted into most of the existing wire lines. All the models are using the PROMILLS MODULAR SYSTEM in order to assemble the right model that matches your needs.